tile grout removal tool

There are a few different ways to remove floor tiles in Australia, depending on the type of tile and the adhesive that was used. If the tile is ceramic or porcelain, you can usually just score the surface with a utility knife and then pry it up. For tougher tiles, you may need to rent a power tile stripper.

If the tile is set in an adhesive, you will need to remove all of the adhesive before you can safely remove the tile. There are a few ways to do this, but one of the most effective is to use a heat gun or hair dryer to soften the adhesive. Once it's soft, you should be able to scrape it away with a putty knife.

You can remove tile with a number of different tools, depending on the type of tile and the method you're using to remove it. For example, ceramic tile can be removed with an oscillating multi-tool or a grout saw, while natural stone tile will require a chisel and hammer. Learning how to remove tile properly will help you avoid damaging your floors or walls. 

To remove ceramic tile, first score the surface of the tile with an oscillating multi-tool fitted with a carbide-grit blade. Be sure to wear safety goggles and gloves when using power tools. Next, use a grout saw to cut through the grout around the perimeter of the tile.

It can be hard to pull up tiles, depending on the type of tile and how it is installed. If the tile is glued down, it can be very difficult to remove. If the tile is nailed or screwed down, it may be easier to remove, but still require some effort. There are a few ways to remove tiles, including using a pry bar or chisel to loosen the tile, using a heat gun to melt the adhesive holding the tile in place, or renting a steam stripper. Whichever method you choose, make sure to wear safety goggles and gloves to protect yourself from sharp edges and hot surfaces.