DIY gutter cleaning (can be a daunting task), but with the right tools, safety precautions and step-by-step instructions, it doesn't have to be! First off, you'll need a ladder and some protective gloves. Make sure your ladder is placed firmly on level ground so that it won't move while you're up there. You may also want to wear goggles or other eye protection in case of debris or dirt flying into your eyes.
Next, remove any large debris like leaves, sticks or twigs from the gutters. This will help ensure water can flow freely through them. Once that's done, use a hosepipe or pressure washer to spray down both sides of the gutters and rinse away any remaining dirt. (If using a pressure washer make sure it's set on low setting). Finally, carefully inspect all seams for cracks and holes then apply sealant where needed. Don't forget to check the downspouts too! And voila - job done!
It's important to remember several things when doing DIY gutter cleaning; always take necessary safety precautions such as wearing gloves and eye protection, never lean too far out over the edge of your ladder when reaching for debris and never work alone if possible! Also be aware of electricity cables near gutters so as not to cause an accident or shock yourself.
Finally, always double check that all seals are secure before heading back indoors - this is vital in order to avoid leaks in heavy rain! All in all DIY gutter cleaning isn't difficult if done properly; just follow these tips for successful results every time!
What is the secret to flawless gutters? Gutter Cleaning Thornton has the answer.