Expert Tips for Your Home


February 27, 2025

DIY Guide to Refelting a Flat Roof: Is It a Viable Option?

Introduction

Flat roofs are a popular choice for many commercial and residential spaces due to their sleek appearance and effective space utilization. However, they require regular maintenance and occasional repairs, particularly when it comes to the roof's waterproofing layer. One of the most common solutions for maintaining flat roofs is refelting. This article will serve as a comprehensive DIY Guide to Refelting a Flat Roof: Is It a Viable Option? We will explore the various aspects of refelting, including its benefits, steps involved, tools required, and much more.

Understanding Flat Roofs

What Are Flat Roofs?

Flat roofs are essentially horizontal or nearly horizontal structures that have minimal pitch. They differ from sloped roofs and are commonly found in commercial buildings but can also be seen in residential homes.

Types of Flat Roof Systems

  • Built-Up Roofing (BUR): This involves multiple layers of roofing felt that are alternated with asphalt.
  • Modified Bitumen: A single-ply roofing membrane that offers excellent waterproofing.
  • EPDM (Ethylene Propylene Diene Monomer): A synthetic rubber roofing membrane that's very durable.
  • TPO (Thermoplastic Olefin): A single-ply membrane known for its reflective properties.
  • Why Choose Refelting?

    The Benefits of Refelting a Flat Roof

    Refelting your flat roof can come with several advantages:

    • Cost-Effective: Compared to complete roof replacement, refelting is often less expensive.
    • Quick Process: Refelting can usually be done in one session, minimizing downtime for businesses.
    • Improved Aesthetics: A fresh felt layer can improve the overall appearance of your roof.

    When Should You Consider Refelting?

    If you notice leaks or water ponding on your flat roof, it may be time to consider refelting. Additionally, if your existing felt shows signs of wear but not extensive damage, refelting might be a viable option.

    Tools and Materials Needed for Refelting

    Essential Tools

  • Utility Knife: For cutting the roofing felt.
  • Roller or Brush: To apply adhesives or sealants.
  • Measuring Tape: Ensures accurate measurement when cutting materials.
  • Ladder: Safety first—make sure it's sturdy!
  • Required Materials

    • Roofing Felt
    • Adhesive
    • Sealant
    • Primer
    • Safety Gear (gloves, goggles)

    DIY Guide to Refelting a Flat Roof: Step-by-Step Instructions

    Step 1: Assess Your Existing Roof Condition

    Before you begin any work, it's crucial to evaluate the condition of your flat roof thoroughly:

  • Look for cracks or tears in the existing felt.
  • Check for water pooling areas.
  • Inspect flashings and other penetrations.
  • Step 2: Prepare Your Work Area

    Clear any debris from the roof surface:

    • Remove leaves, branches, or dirt.
    • Make sure there’s no standing water.

    Step 3: Repair Any Damaged Areas

    Before adding new felt:

  • Patch small holes with roofing cement.
  • Replace any severely damaged sections.
  • Step 4: Apply Primer

    Applying primer helps ensure good adhesion for the new felt layer:

    • Use your roller or brush to apply an even coat over the entire area.

    Step 5: Install New Roofing Felt

  • Roll out the new felt across your flat roof.
  • Ensure each piece overlaps by at least six inches for proper sealing.
  • Step 6: Seal Edges and Seams

    Once all pieces are laid down:

  • Apply adhesive along all edges and seams.
  • Use sealant where necessary to prevent leaks.
  • Common Issues During Refelting

    What To Do If You Encounter Problems?

    Leaks After Installation

    If you notice leaks after refelting, it might indicate improper sealing or installation errors.

    Blisters on the Surface

    These could form if air gets trapped under the new felt layer; ensure proper installation techniques were followed during application.

    When to Call Commercial Roofing Contractors

    While DIY projects can be fulfilling, some situations warrant professional intervention:

  • Extensive Damage
  • Complex Flashing Situations
  • Safety Concerns
  • For those living near urban centers searching "commercial roofing near me," highly skilled contractors are available who specialize in commercial flat roofing services.

    Comparative Analysis Between DIY and Professional Services

    | Aspect | DIY Method | Professional Services | |--------------------------|------------------------------------------|---------------------------------------| | Cost | Generally lower | Higher initial costs | | Time | Can take longer depending on skill level| Usually quicker due to experience | | Quality | Varied based on individual skill | Consistent high quality | | Warranty | Limited | Comprehensive warranties |

    FAQs About Refelting Flat Roofs

    FAQ 1: How long does refelting last?

    Refelted roofs typically last between 10 to 15 years if properly maintained.

    FAQ 2: Can I refelt over existing felting?

    It’s generally not recommended due to potential moisture issues; however, minor repairs may be feasible.

    FAQ 3: How often should I inspect my flat roof?

    It's best practice to inspect your flat roof at least twice a year and after severe weather events.

    FAQ 4: Will I need special permits?

    Check local regulations; some areas may require permits for significant roofing work.

    FAQ 5: How do I find reliable commercial roofing contractors?

    Search online with terms like “commercial roofing contractors” or “commercial flat roofing contractors” in your area for reviews and recommendations.

    FAQ 6: Is there an eco-friendly option for flat roofs?

    Yes! TPO membranes are known for being energy-efficient and environmentally friendly alternatives.

    Conclusion

    Refelting a flat roof is indeed a viable option if approached correctly through careful assessment and execution of steps outlined in this guide— DIY Guide to Refelting a Flat Roof: Is It a Viable Option? Whether you're considering this route as a cost-effective solution or simply enjoy taking matters into your own hands, remember that safety should always come first! Don’t hesitate to reach out to commercial roofing professionals if you find yourself feeling overwhelmed; sometimes local Atlanta commercial roofing experts seeking expert advice is just as valuable as tackling it yourself!

    As you weigh your options—if you're considering hiring help—searching online phrases like "commercial roofing near me" will yield numerous local professionals ready to assist you with reliable commercial roofing services tailored specifically for flat roofs!